Peugeot 407 B2699 Engine Trouble Code
What is Peugeot 407 B2699?
Peugeot 407 B2699 indicates potential catalytic converter failure. If completely failed, your vehicle may not run properly and fuel economy will suffer significantly. Average replacement cost is $2,000–$2,140. This repair requires professional service and should not be delayed.
B2699 on the Peugeot 407
Owners who tow regularly with their Peugeot 407 should pay extra attention to B2699. The additional thermal load placed on the transmission fluid accelerates the degradation of the torque converter clutch solenoid, a frequent secondary cause of this code.
Code Information
| Code Type: | OBD-II Body (B) Trouble Code |
| System: | Body |
| Vehicle: | Peugeot 407 |
| Brand: | Peugeot |
| Model: | 407 |
| Code: | B2699 |
B2699 Peugeot 407 Symptoms
Check Engine Light
Illuminated Peugeot 407 dashboard warning
Engine Stalling
Engine stops unexpectedly or misfires
Performance Issues
Reduced power or acceleration on the Peugeot 407
Starting Problems
Difficulty starting the engine
Poor Fuel Economy
Increased fuel consumption on the Peugeot 407
Increased Emissions
Failed emissions test due to B2699
B2699 Code Structure
Understanding what each digit means in the B2699 body trouble code:
| B | 2 | 6 | 9 | 9 |
|---|---|---|---|---|
| Body Code | Fuel And Air Metering (Injector Circuit Malfunctions Only) | Fuel Temperature Sensor B Circuit Range/Performance | Crankshaft Position Sensor A Circuit Malfunction | Reverse Input Circuit |
How to Fix Peugeot 407 B2699
Diagnostic Steps:
The catalytic converter has oxygen sensors before and after it. When warm and in closed-loop mode, the upstream O2 sensor reading should fluctuate, while downstream should remain steady.
Repair Solution:
Verify all electrical connections are clean and tight. Check for damaged wiring, especially in high-heat or high-vibration areas. Use manufacturer wiring diagrams for accurate diagnosis.
Technical Notes:
B2699 on electronically controlled automatic transmissions relates to shift solenoid operation. The solenoid actuates hydraulic circuits controlling clutches or bands for gear changes.
Peugeot 407 B2699 Repair Cost
Addressing B2699 on your Peugeot 407 typically involves: dealer diagnostic fee $95–$150, oxygen sensor replacement $180–$320 (parts + labour), or catalytic converter replacement $1,800–$2,400 if damage has progressed. Independent specialist garages often charge 20–30% less than franchised dealers for identical work.
B2699 Description
B2699 engine trouble code is related to Reverse Input Circuit.
Main Cause
The primary reason for B2699 OBD-II Engine Trouble Code is: Fuel Temperature Sensor B Circuit Range/Performance.
Common B2699 Misdiagnosis on the Peugeot 407
When B2699 triggers on the Peugeot 407, a flashing check-engine light (as opposed to a steady one) indicates an active misfire. Misfire codes are commonly misdiagnosed as sensor faults; always rule out ignition and fuel delivery issues before testing sensors.
DIY Repair Guide: B2699 on Peugeot 407
The throttle body on the Peugeot 407 can be cleaned without full removal. Use a clean rag and throttle body cleaner spray with the engine off and cool. After cleaning, an idle relearn is mandatory: disconnect the battery for 10 minutes, reconnect, and allow the engine to idle for 10 minutes undisturbed.
Preventing B2699 on the Peugeot 407
The Peugeot 407 EVAP system requires the fuel tank breather hoses to be flexible and crack-free. A visual inspection at every oil change prevents the slow vacuum leak that triggers B2699 without any drivability symptom.
Frequently Asked Questions — Peugeot 407 B2699
A: Clearing the code without repair allows the fault condition to persist. Depending on the cause, this can lead to catalytic converter damage, increased fuel consumption, and secondary component failures that are significantly more expensive to address than the original fault.